Complete Steering System
1998-2004 Frontier & 2000-2004 Xterra
SPTCSTEER
Sold
Description
- Maximize suspension travel and handling.
- Factory tie-rod ends can wear prematurely during off road abuse.
- Old or worn components cause sloppy steering.
- Teflon-lined aircraft grade heims replace the stock steering components.
- Heat treated misalignment spacers, chromoly tie rods and grade 8 hardware are included.
- Can be used on lifted or unlifted vehicles.
- The King Kong steering system is designed to eliminate the problematic sloppy steering on your Nissan.
- Starting with the stock centerlink pins that get worn and cause most of the slop in Nissan steering, this includes an 1-1/4" custom chromoly replacement that is designed to double shear a custom idler arm, gusseted pitman arm and heim inner tie-rod ends for maximum strength and durability.
- Retains the factory idler arm pin for ease of bolt on reinstallation, and incorporates the idler arm gusset to prevent the pin from bending.
- The custom idler arm internal components include double stacked internal sealed roller bearings that replace the factory inner rod ends and include a Teflon lined bushing and chromoly inner sleeve that upgrade where the idler arm pivots.
- The inner sleeve prevents over tightening the idler arm guts during assembly and all components are individually replaceable.
- Comes gusseted and modified the factory pitman arm to incorporate a 3/4" uniball and misalignment spacers which bolt to the centerlink.
- Utilizes 5/8" grade 8 hardware to connect the centerlink, idler arm and pitman arm components.
- For left hand drive models only
Details
- SPTCSTEER
- SPTCSTEER
- New
Shipping Information
- Item Requires Shipping
- 35.0 lbs.
