Xterra Custom Rear Driveshaft
Custom rear driveshaft with double cardan joint at the transfer case end and u-joint at the differential end with adapter to xterra pinion flange.
- This driveshaft will eliminate problematic joint that is used by Nissan manufacturing driveshaft that causes vibration and possible failure.
- Driveshaft made to custom length to reduce rear driveshaft angles can accommodate mild to large amounts of lift.
- Customer will have to leave a deposit and will need to specify the length of their driveshaft from the tip of the outpost shaft of the transfer case to the center of the pinion flange. Once that is received we will start having it made and customer will need to return to us their stock reverse slip yoke. When the reverse slip yoke is returned to us we will give back the deposit that was paid.
- With Vehicle On The Ground Measure The Two Points Shown On Picture Example #3
- Item Requires Shipping
- 35.0 lbs.