Need Help?

954-971-3510 Call Us: M-F 11am to 7pm EST

Click on image to zoom

Frontier Articulator Suspension Package

1998-2004 Frontier, 4WD, Regular or King Cab with Diesel Engine

Arms are made to order and can take up to or more than 2 weeks. In most cases they are made in under that time. However in busier times it can run a little over. We appreciate your patience.
Pricing: $1,350.00


  • This package will provide the best articulation possible in a bolt on kit.
  • Package includes:
    1. Chromally tubular upper a-arms
      • Upper control arms are made longer than stock arms to provide actual lift while maintaining proper ball joint angles
      • Keeps CVs well within manufacturer's specifications
      • Chromally tubing, long used by the racing industry, is lightweight yet stronger than steel plate
      • Designed to give a true 3" of lift and provides additional wheel travel
      • Aligns easily into manufacturer's specifications
    2. Greasable upper ball joints
      • We use only the best ball joints available, not low quality knock-offs
    3. Polyurethane bushings, sleeves and hardware
    4. Idler arm brace
    5. Zerk fittings
      • The zerk fittings help to eliminate annoying squeak from bushings found on other kits
      • Increases the life of upper balljoints and bushings
    6. 2 RS9000XL rear shocks
    7. 2 RS5000 front shocks
    8. Heavy duty torsion bars with 30% higher spring rate
    9. Rear 3 leaf add-a-leaf pack
      • Full length 3 leaf add-a-leaf pack was designed specifically for your Nissan
      • Anti-friction pads to reduce noise and increase longevity
      • Includes center pin bolts and leaf pack clamps
      • The leaf pack clamps are long enough for the whole leaf pack to keep individual leafs from moving
      • Helps revive sagging factory springs
      • Provides 3" of lift without impeding wheel travel or articulation
      • Increases your load carrying capacity so you don't have to worry about bottoming out when your Nissan is loaded down
      • Full length leaf packs distribute the load more evenly along the entire length of the spring
      • Diamond cut edges to distribute the load more evenly
      • Virtually eliminates axle wrap
      • Helps prevent sagging and breakage of stock leaf packs
      • 3 leafs per side
      • Removing the overload leaf is recommended
    10. Revolver shackles
      • For the ultimate in rear axle articulation the revolver shackles replace your stock shackles
      • Direct bolt on
      • Comes with sleeves, bolts and detailed installation instructions which include required modifications
    11. Comes with complete installation instructions
  • This lift will allow for 32" tires on stock back spaced wheels
  • This kit will improve the off -road ride and make on-road ride more controllable
  • You will have to modify brake line (stock brake line bracket must be modified) when using stock brake lines.
  • Longer Brake Lines are sold separately.
  • New wheels with negative 3.75" backspacing recommended with this lift
  • Extensively tested for safety on and off road
  • Removing overload leaf is recommened. If you choose to leave the overload leaf in, you WILL need new U-Bolts.
  • Shackles are made to order and can take up to a week. In most cases they are made in under that time. However in busier times it can run a little over. We appreciate your patience.


  • New

Shipping Information

  • Item Requires Shipping
  • 140.0 lbs.

Share Frontier Articulator Suspension Package on Facebook

Sign In or Create an Account