Need Help?

954-971-3510 Call Us: M-F 11am to 7pm EST

Click on image to zoom

Complete Steering System

1998-2004 Frontier & 2000-2004 Xterra



  • Maximize suspension travel and handling.
  • Factory tie-rod ends can wear prematurely during off road abuse.
  • Old or worn components cause sloppy steering.
  • Teflon-lined aircraft grade heims replace the stock steering components.
  • Heat treated misalignment spacers, chromoly tie rods and grade 8 hardware are included.
  • Can be used on lifted or unlifted vehicles.
  • The King Kong steering system is designed to eliminate the problematic sloppy steering on your Nissan.
  • Starting with the stock centerlink pins that get worn and cause most of the slop in Nissan steering, this includes an 1-1/4" custom chromoly replacement that is designed to double shear a custom idler arm, gusseted pitman arm and heim inner tie-rod ends for maximum strength and durability.
  • Retains the factory idler arm pin for ease of bolt on reinstallation, and incorporates the idler arm gusset to prevent the pin from bending.
  • The custom idler arm internal components include double stacked internal sealed roller bearings that replace the factory inner rod ends and include a Teflon lined bushing and chromoly inner sleeve that upgrade where the idler arm pivots.
  • The inner sleeve prevents over tightening the idler arm guts during assembly and all components are individually replaceable.
  • Comes gusseted and modified the factory pitman arm to incorporate a 3/4" uniball and misalignment spacers which bolt to the centerlink.
  • Utilizes 5/8" grade 8 hardware to connect the centerlink, idler arm and pitman arm components.
  • For left hand drive models only
If used on right hand drive the idler arm brace will not work and you would have to grind idler arm and pitman arm brackets.


  • New

Shipping Information

  • Item Requires Shipping
  • 35.0 lbs.

Share Complete Steering System on Facebook