Need Help?

954-971-3510 Call Us: M-F 11am to 7pm EST

Click on image to zoom

The Articulator Suspension Package With Bilstein Shocks

1986.5-1997 Hardbody 4WD

NACSPHB4ARTBIL
Arms are made to order and can take up to or more than 2 weeks. In most cases they are made in under that time. However in busier times it can run a little over. We appreciate your patience.
Pricing: $1,070.00
Qty:

Description

  • This package provides the best articulation possible in a bolt on kit
  • Articulator Package Includes:
    1. Chromolly tubular upper control arms
      • These control arms are made longer than stock to provide actual lift while maintaining proper ball joint angels
      • Control arms keep the CV's well within manufacturer's specifications
      • Chromally tubing, long used by the racing industry, is lightweight yet stronger than steel plate
      • Designed to give a true 3" of lift and provide additional wheel travel
      • Aligns easily into manufacturer's specifications
      • Works with factory ball joints
    2. 3 Leaf Add-A-Leaf Pack
      • The full length 3 leaf add-a-leaf pack was designed specifically for your Nissan
      • Anti-friction pads to reduce noise and increase longevity
      • Comes with center pin bolt and leaf pack clamps
      • The leaf pack clamps are long enough for the whole leaf pack to keep individual leafs from moving
      • Helps revive sagging factory springs
      • Provides 3" of lift without impeding wheel travel or articulation
      • Also increases your load carrying capacity so you don't have to worry about bottoming out when your Nissan is loaded down
      • Full length leaf packs distribute the load more evenly, along the entire length of the spring
      • Diamond cut edges
      • Virtually eliminates axle wrap
      • These 3-leaf add-a-leaf packs help prevent sag and breakage of stock leaf packs
      • Removing overload leaf is recommened
    3. Revolver Rear Shackles
      • Provides the ultimate in rear axle articulation
      • Direct bolt-on to replace factory shackles
      • Comes with sleeves and bolts
    4. Front and Rear Bilstein Heavy Duty Shocks
    5. Heavy Duty Torsion Bars with 30% higher spring rate
    6. Idler Arm Brace
    7. Installation Hardware
    8. Complete Installation Instructions
  • Stock brake line must be modified when using factory brake lines
  • Extended brake lines sold separately--Extended Brake Lines
  • New wheels with negative 3.75" backspacing recommended
  • Extensively tested for safety on and off road
  • If you choose to leave the overload leaf in, you WILL need new U-bolts which are sold separately---Longer U-Bolts
  • Shackles are made to order and can take up to a week. In most cases they are made in under that time. However in busier times it can run a little over. We appreciate your patience.

Details

  • NACSPHB4ARTBIL
  • NACSPHB4ARTBIL
  • New

Shipping Information

  • Item Requires Shipping
  • 145.0 lbs.



Share The Articulator Suspension Package With Bilstein Shocks on Facebook

Sign In or Create an Account
x

x