Shop by Category

********************************************
Parts

3 short lengths (3-5 inches) of 14 guage wire

appropriate wire connecters ie spade connectors and push on (like what speakers use)

1 long length of 16 gauge wire.

What to do

Find the foglamp relay in the engine compartment. Pull it out and wire points 2-3-5 on the relay to it's respective mounting slots...ie 2 to 2, 3 to 3, and 5 to 5. You will be using the 3 short wires for this. Do a good job here. Don't wrap the wire around relay points or push bare wires into the slots. With the long wire, attach with a connector to number 1 ON THE RELAY. Now run this wire to where you can find +12v when the ignition is turned on. I have an aftermarket alarm and I tapped into the ignition lead. I hope the pictures came out. There was an empty spot next to where the relay was so I just stuffed in headfirst.

So there you go. Fog lamps on with ignition on with or without the low beams on. The fog lamps will turn off when the highbeams on. Also don't have to worry the fogs will be on when you're just parked listening to tunes and with key in acc position.
*********************************************

I also have couple pic of how its setup to get the idea of it. But I can post up the image. So if someone can do it for me I'll e-mail you the pictures so you can post them. Just post your e-mail on this thread. Thanks

--------------------

Pictures of My Pathfinder -R.I.P. 11-01-03

Post Extras