Welcome to the AUTOMOTIVE CUSTOMIZERS Bulletin Board! Please adhere to the board rules, posted at the bottom of the page. Parts found on this BB can be purchased through our on-line catalog to the left.
hummer_drummer
stranger
Reged: 04/23/09
Posts: 15
|
|
will a viscous lsd from a 240sx with a r200 rear fit in a r200a front diff of a pathfinder?
|
Reserector_
"The Flaming Marshmallow"
Reged: 02/13/06
Posts: 612
Loc: Laurel, Mississippi
|
|
All I can say is probably so. I used a C200 LSD in my R200, but to do so, I had to anneal, drill and thread the slug that acted as an axle spacer in the C200 application. It fit fine, but lacked a drilled and tapped spider gear for the stub shaft to attach to.
If the diffs you mentioned have the threaded hole needed, I believe it would work.
I wish I knew more about it, but that's all I've got.
--------------------
http://www.mississippi-mud.com/forums/
|
madhornet1
addict
Reged: 01/11/07
Posts: 535
Loc: New Brunswick Canada EH!
|
|
stated here that u do not want this unit as it works only when sped up not any good for offroad and i believe it will not fit
--------------------
95 Pathy,3"BL,4"SL,Headers,110a Alt.LSD Front,Lockright Rear,Skyjacker Shocks,AC's Steering Kit,33 Trxus MT's on 10's,7" Clarion DVD,7" DVD Rear,XMSat,1000W Kenwood,2 12" Rockford's,1000W Inverter
|
Reserector_
"The Flaming Marshmallow"
Reged: 02/13/06
Posts: 612
Loc: Laurel, Mississippi
|
|
I'm not familiar with the viscous units. Just to clarify, I was referring to the clutch type. Thanks for pointing that out, Madhornet.
--------------------
http://www.mississippi-mud.com/forums/
|
|
0 registered and 9 anonymous users are browsing this forum.
Moderator: Rockjaw, tjl
Print Topic
|
Forum Permissions
You cannot start new topics
You cannot reply to topics
HTML is disabled
UBBCode is enabled
|
Rating:
Topic views: 404
|
|
|
|
|
|
Powered by UBB.threads™ 6.5.5
Automotive Customizers Board Rules:
**No discussion of other Nissan aftermarket parts vendors, any direct links will be deleted.
**No vendor or manufacturer bashing.
**Keep things positive, no flaming, profanity or porn allowed.
**We also ask that you respect the views of the other members even when they don't agree with your own.
If you have questions feel free to ask the moderators or admins.
All parts found on this BB can be purchased through AUTOMOTIVE CUSTOMIZERS (AC). You can contact us by calling 954-971-3510 or via e-mail at info@4x4parts.com. Parts can also be ordered through our on-line catalog shown at the left. We're glad to have you aboard!
|
Previous
Index
Next
Threaded
Edit
Reply
Quote
