LONG ARM ENGINE/TRANSMISSION SKID PLATE
1997-2006 Jeep TJ Wrangler & 2004-2006 LJ Unlimited
Made from 1/4" thick steel and reinforced with 1/4" angle to provide beefy protection for your engine's oil pan and your transmission. Installation is quick and easy and only requires drilling of two holes to attach the rear of our skid plate to whatever transfer case skid plate you are using. There is even an oil drain hole so that you can perform your regular maintenance without removing the skid plate.
- Which one fits? To determine which model skid plate you need simply take a measurement from the engine's oil drain plug to the leading edge of the transfer case skid plate. You'll get a measurement of approximately 16" or 20".
- Please Note: Fits 6 cylinder models ONLY. Also, if you have an aftermarket exhaust header that goes under your engine or transmission, the skid plate may not fit properly. An example would be the Borla exhaust header for 1997 model TJ's.
- Item Requires Shipping
- 54.0 lbs.
- W0.0000” x H3.0000” x L20.0000”