Complete Xterra 2 Inch Body Lift
- This is a complete body lift kit including hardware.
- Provides 2 inches of lift.
- Provides more fender space for larger tires without as much change in ride characteristics compared to a suspension lift.
- Kit comes with:
- Provisions for Stock Skid Plate
- High Quality Body Blocks
- Grade 8 Body Bolts
- Provisions for Power Steering Reservoir Steering Shaft Extension
- All Necessary Hardware
- Installation Instructions.
- Will allow you to retain your stock side bars if so equipped.
- Manual transmission shifter can be left in its position but will be 2" lower.
- Lift kit will not require replacement or extension of any hoses or brake lines.
- Rear bumper will need to be re-drilled for 2" drop.
- Provides room for minimum of 32" tires but will depend on the wheel and tire combination you choose.
- This body lift will work in conjunction with a suspension lift.
- The reason why you should relocate the radiator instead of extending hoses for convenience is so that when the body lift is installed you want to make sure the fan shroud and radiator match positioning of the clutch fan and that the radiator get sufficient amount of cooling. Engineers intended for the radiator to be the same level as the engine for maximum cooling.
- Under normal conditions reduced airflow through radiator will suffice. In extreme situations when offroading in very hot climates and you get little to no airflow due to reduced speeds and increased engine temperatures because of strain to engine this marginal radiator cooling will no longer be sufficient.
- Item Requires Shipping
- 20.0 lbs.